CLICK HERE FOR BLOGGER TEMPLATES AND MYSPACE LAYOUTS »

~STARP HEBAT~


STAR PUTRA TERUS GEMILANG

Sunday, June 27, 2010

bus topologi

A bus topology connects each computer (nodes) to a single segment trunk (a communication line, typically coax cable, that is referred to as the 'bus'. The signal travels from one end of the bus to the other. A terminator is required at each to absorb the signal so as it does not reflect back across the bus. A media access method called CSMA/MA is used to handle the collision that occur when two signals placed on the wire at the same time. The bus topology is passive. In other words, the computers on the bus simply 'listen' for a signal; they are not responsible for moving the signal along.

0 comments: